Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Renault Clio IV, Captur, Koleos, Megane

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the service light on a Renault Clio IV, as well as on a Captur I, Koleos, or Megane IV. Insert the keycard into the designated slot, turn on the system without starting the engine, and navigate through the menu until you see "service required". Press and hold the "up" button on the cruise control stalk.

Keep it pressed until the reset screen appears, then confirm the reset following the instructions on the display.

The hold time is about 5 to 10 seconds. A visual confirmation will appear "oil change in: (distance/time).

As a final check, the message "service required" should disappear.


Posted on 19 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Clio
How to Reset the Service Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In today's video, you will see how to reset the service interval on a Renault Clio, thereby turning off the corresponding light. This tutorial also a…
How to Reset the Tyre Pressure Warning Light on the Renault Clio - Captur
How to Reset the Tyre Pressure Warning Light on the Renault Clio - Captur
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The tyre pressure warning light on the dashboard indicates a possible puncture or loss of pressure in one or more tyres. Here’s how to reset the TPMS…
How to Reset the Multimedia System of the Renault Clio - Captur
How to Reset the Multimedia System of the Renault Clio - Captur
Renault Clio (2019-2026 / Clio V, Clio 5) These brief and simple steps will show you how to reset the multimedia system by performing a forced shutdown on the Renault Clio, as well as the Cap…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos