Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorbers of the Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Shocks

See other generations:
Video tutorial

Below are the instructions for removing and replacing the front suspension of the Renault Captur. First, open the vehicle's bonnet and start unscrewing the upper suspension bolts, removing the gasket and the plastic cover located under the windscreen wiper first; raise the vehicle and remove the front wheel, then disconnect the suspension from below, as shown in the video.

At this point, replace and install the new front suspension, securing it properly; then reassemble all previously removed components.


Posted on 23 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Discs and Pads on the Renault Captur
Replacing the Front Brake Discs and Pads on the Renault Captur
Renault Captur (2013-2019 / MK 1) Below are the instructions that will allow you to dismantle and replace the front brake discs and pads on the Renault Captur. First, lift the vehicle…
How to Fold Down the Rear Seats of a Renault Captur
How to Fold Down the Rear Seats of a Renault Captur
Renault Captur (2019-2026 / MK 2) Before you can begin, open the rear hatch of the boot of your Renault Captur using the button on the electronic key. Start by pushing the front seats…
How to Replace the Front Wiper Blades on a Renault Captur
How to Replace the Front Wiper Blades on a Renault Captur
Renault Captur (2013-2019 / MK 1) Replacing the wiper blades on a Renault Captur is a straightforward and quick task that you can do yourself, aided by our short instructional video. …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos