Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Service warning light

Today, we will show you how to reset the oil change and maintenance light on a Renault Kangoo vehicle. To perform this operation, press the button located to the right of the instrument panel and turn on the ignition at the same time. Keep the TRIP A button pressed for a few seconds; when the current kilometres on the display start to flash, wait a few seconds and restart the instrument panel. At the end of the reset, the kilometres to the next service will be calculated. If there are any problems, it will be necessary to go to a workshop for a check of the tank sensors.

Posted on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Kangoo
How to Reset the Service Light on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Manually resetting the service light on your first-generation Renault Kangoo (1997-2008) is very simple. Follow these steps to complete the operation…
How do you reset the Service light on the Renault Kangoo?
How do you reset the Service light on the Renault Kangoo?
Renault Kangoo (1997-2008 / MK 1, KC, KW) It will be possible to reset the Service light of the Renault Kangoo by turning on the instrument panel, inserting the appropriate key into the ignit…
How to reset the Service light on the Renault Kangoo?
How to reset the Service light on the Renault Kangoo?
Renault Kangoo (1997-2008 / MK 1, KC, KW) To reset the Service light on the Renault Kangoo, turn on the instrument panel by rotating the key in the ignition switch: once it is on, press and h…

    Frequently Asked Questions

    • Kangoo 2007-2021 - Why does the Renault Kangoo service light come on? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos