|
Do it yourself
| |||
| ||||
Repairing a Digital Key
Model: Renault Laguna
Laguna 2, MK 2, X74
- Years 2001-2007
This video shows how to repair the smart key of the Renault Megane Laguna. First, obtain a new cover and a hacksaw blade. Once the metal key and battery are removed, place the smart key in a vice and start cutting along the joint line of the two cover pieces (which is sealed); be careful not to cut too deeply as this could damage the internal components of the key. The cut can go a bit deeper only on the shorter side of the perimeter. Once the key is opened, lift the green circuit area with a screwdriver until it is removed. Most malfunction issues arise from the disconnection of the transponder coil, the battery area, or the three buttons for opening/closing the doors. For this reason, using a fine-tipped soldering iron, reinforce the electronic components, the solder joints around the buttons, and the battery. Once the microsoldering is complete, use scissors to remove the small piece of plastic near the battery: this will allow the circuit board to fit unobstructed into the new shell. Properly position the green board between the two parts of the shell and, after verifying the accuracy of the positioning, apply glue to the inner corners of the shell and reseal everything.
Updated on 4 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Laguna
(2001-2007 /
Laguna 2, MK 2, X74)
Remove the door panel of a Renault Laguna? Let's see the disassembly of the door panel. Unscrew the screws located in the space of the upper lever of…
Renault Laguna
(2007-2015 /
MK III, Laguna 3, MK 3, Laguna III, X91)
Below we will see the instructions that will allow us to disassemble and replace the original car radio of the Renault Laguna, in simple steps. First…
Renault Laguna
(2001-2007 /
Laguna 2, MK 2, X74)
Let's briefly see the instructions that will allow us to disassemble and open the electronic board of the Renault Laguna key, but also of the Espace.…
Other guides you may be interested in
|
How to Remove the Gear Knob on a Volkswagen Golf Mk4
Do you want to replace the gear knob on your Volkswagen Golf Mk4? Let's see how to proceed in this video. Use a plastic lever to disconnect the leather gaiter frame; take the gear knob in your hands and rotate it left and right until you remove it from the gear stick (remove the metal clip as shown in the video). To install the new knob: take the new knob and slide it onto the stick in the centre console until fully secured; install the new leather gaiter with the clip. Finally, test the movement of the stick in the centre console to ensure the knob is correctly fitted. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.127
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |