Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the Renault Master?

Model: Renault Master MK 4, XDD - Years 2024-2026
Part: Checks and maintenance

This video shows the sequence of actions needed to complete a service on a Renault Master vehicle. After gathering all necessary materials, position yourself under the vehicle and remove the lower engine protection panel. This gives you access to the oil sump, which you can open after placing a suitable container underneath to collect the used oil. While the sump drains, replace the oil filter, then return under the Renault Master to close the sump and reattach the panel. Continue by adding new engine oil, replacing the air filter, and finally resetting the service light.

Posted on 25 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Master
How to reset the service light on the Renault Master
Renault Master (2010-2023 / MK 3) After performing the routine service required by the Renault Master, it is necessary to reset the service light, usually orange and shaped like a spa…
How to replace the rear headlight bulb of the Renault Master
How to replace the rear headlight bulb of the Renault Master
Renault Master (2010-2023 / MK 3) If you need to replace the rear headlight bulb of your Renault Master, but you don't know how to do it, then you just have to carefully read the foll…
How to adjust the clock of the Renault Master
How to adjust the clock of the Renault Master
Renault Master (2010-2023 / MK 3) Adjusting the clock of the Renault Master is a simple and quick operation to be carried out independently. To perform this operation, we need to turn…

Other guides you may be interested in

    Frequently Asked Questions

    • Master 2010-2023 - What problems does the Renault Master 2.3 dCi have? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos