|
Do it yourself
| |||
| ||||
How to replace oil and filters on a Renault Master/Vauxhall Opel Movano
Model: Renault Master
MK 3
- Years 2010-2023
Let's see how to change oil and filters on a Renault Master (or a Vauxhall/Opel Movano). Let's start by replacing the air filter, which is located in the engine compartment: it is a large black plastic box fixed with butterfly screws or clips. Unscrew them, lift the cover, remove the old filter, clean the inside well from dust and insert the new filter making sure it is placed in the right direction. Close the cover and tighten the screws. Now let's deal with the oil. Warm up the engine, lift the vehicle at the front and place it on two jack stands, put a large container under the oil pan, open the filler cap and then remove the drain plug to let the oil drain, which we will then dispose of properly (together with the old filter) at an authorized center. While the oil is draining, unscrew the old filter, clean the filter seat, lubricate the new gasket with some clean oil and screw the new filter by hand. Put a new cap and a new gasket on the oil pan and fill it with a funnel up to 90% of the tank capacity, with the oil recommended by the manufacturer. Start the engine to allow the filter to fill up, then check the level and add a little oil at a time until reaching the desired level (just below the "max" mark). Never exceed this mark, it is very dangerous. Close the cap and our work is done.
Posted on 20 November 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Master
(2010-2023 /
MK 3)
In this video we can see how to remove the inner panel of a Renault Master MK 3, as well as of an Opel/Vauxhall Movano, and a Nissan NV400: to do thi…
Renault Master
(2010-2023 /
MK 3)
In this guide we will see the main instructions that will allow us to disassemble and remove the door panel of the Renault Master, but also of the Op…
Renault Master
(2010-2023 /
MK 3)
In this video tutorial, you will see how to reset the oil change reminder in a 2015 Renault Master by following a few simple steps: the first thing t…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.346
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |