|
Do it yourself
| |||
| ||||
How to Replace the Front Strut on the Renault Kangoo 1
Model: Renault Kangoo
KC, MK 1, KW
- Years:
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Video tutorial
Here’s how to replace the strut on the Renault Kangoo 1. This operation requires a professional spring compressor; without it, the task is not possible. Loosen (without removing) the central nut of the strut from the engine bay, then lift the front of the vehicle and remove the wheel. To detach from the ball joint, clean the bolts with a brush and WD-40, then unscrew them and support the hub with a jack. Completely unscrew the upper bolts (under the bonnet) and extract the spring/strut assembly from the wheel arch. Mount the assembly on the hydraulic spring compressor and safely compress the spring, ensuring the coils are well secured. With the spring compressed, unscrew the central nut that secures the upper mount. Remove the upper mount, bearing, dust cover, and finally the spring, freeing the old strut. Manually purge the new strut 3 to 5 times, position the new strut on the compressor, and reassemble the dust cover, spring, and upper mount. With the spring compressed, screw on the central nut and tighten to 60 Nm. Release the compressor and insert the assembly into the wheel arch, manually screwing in the upper fixings. Connect the strut to the hub, reassemble the wheel, and from under the bonnet, tighten the upper nuts. You can now refit the protective cover.
Posted on 27 September 2026 by ScegliAuto
Related tutorials
Renault Kangoo
(2007-2021 /
MK 2, FW, FC)
To replace the rear shock absorbers of the Renault Kangoo 2, we need to lift the rear part of the vehicle and remove the wheel in order to access the…
Renault Kangoo
(2007-2021 /
MK 2, FW, FC)
It will be possible to replace the rear shock absorber of the Renault Kangoo by lifting the vehicle using a jack: then you can loosen the screws that…
Renault Kangoo
(2007-2021 /
MK 2, FW, FC)
Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |