Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front wheel bearing of the Renault Scenic

Model: Renault Scenic Scenic 1, MK 1, RX4 - Years 1993-2003
Part: Bearing

The steps outlined in this guide will show us how to disassemble and replace the front wheel bearing of the Renault Scenic. First, we lift the car and start by disassembling the front wheel; then we remove the brake caliper, unscrewing the screws located on the back of the caliper, as shown in the video. At this point, we also remove the brake disc, subsequently disconnecting the control arm; we then remove the wheel bearing, unscrewing the central nut, replacing it with the new original one. Finally, we reassemble the brake system components!

Posted on 31 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, open the bonnet of your Renault Scenic. First, unclip and remove the rear cover of the blown bulb. Next, unclip the clip that secure…
Replacement of the timing belt of the Renault Scenic 1.5 dCi
Replacement of the timing belt of the Renault Scenic 1.5 dCi
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) The following instructions will show us how to disassemble and replace the timing belt of the Renault Scenic 1.5 dCi. First, we open the hood of the …
How to Replace the Headlight Bulb on a Renault Scenic
How to Replace the Headlight Bulb on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before you begin, open the front bonnet of your Renault Scenic. Start by removing the blown bulb from its housing in the headlamp by turning the bulb…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos