Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the car radio of a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Car stereo

Let's see the disassembly of the original car radio on a Renault Megane. Here's how to do the disassembly. We use the original (aftermarket) metal dongles to disassemble our car stereo. We insert the keys in the holes placed on the plastic cover of the stereo (on the sides of the stereo) by pulling with the hands towards us the same. We remove the car stereo paying attention to the various cables connected in the rear part (we disconnect the power supply terminals and the antenna cable). We assemble the new car radio with a special adapter (if the car radio is not original) and we check that it works correctly.

Posted on 4 April 2020 by ScegliAuto

Video tutorial

Related tutorials

How to reactivate the Renault Megane car radio
How to reactivate the Renault Megane car radio
Renault Megane (2002-2010 / Megane 2) In this guide, we will see the instructions that will allow us to reactivate the original radio of the Renault Megane, in simple steps. First of all,…
How to disassemble the car radio on Megane
How to disassemble the car radio on Megane
Renault Megane (2002-2010 / Megane 2) Remove the car radio from the Megane? Let's see the disassembly of the car radio with attached disconnection of the electrical terminals. We use the …
How to enter the radio code for the Renault Megane.
How to enter the radio code for the Renault Megane.
Renault Megane (2002-2010 / Megane 2) In this short and simple guide, we will see the instructions that will allow us to find and enter the code of the Renault Megane car radio. First, we…

Other guides you may be interested in

How to Replace the Engine Air Filter on a Peugeot Partner

The engine air filter for this car model is located at the rear of the engine bay, directly under the windscreen, in a central position: to access the filter housing, first remove the brake fluid reservoir; then you can unscrew the three front screws that secure the filter container cover, release the side latch, and complete the removal of the cover; then extract the old filter, remove any dirt residue, ensuring no impurities enter the intake, install the new filter ensuring the seal fits perfectly against the edges of the box, and refit the cover and brake fluid reservoir.

Watch the video!


by ScegliAuto

More videos