Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

Is the maintenance light on your Renault Clio illuminated? Here’s how to reset it. Turn on the instrument panel with the ignition key. Press the button located near the steering wheel and navigate to the maintenance menu. Hold down the button until the "Perform Maintenance" message disappears.

The instrument panel will display "Maintenance in"; press the button until you select the desired kilometres for the next maintenance. Finally, double-check everything and turn off the instrument panel.

Always use the buttons on the levers for maintenance.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…
How to Reset the Service Light on a Renault Clio V
How to Reset the Service Light on a Renault Clio V
Renault Clio (2019-2026 / Clio V, Clio 5) .. Let’s see how to reset the service light on a Renault Clio V: turn on the ignition without starting the engine a.. …
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos