Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Clio
  6. : Renault Clio 4 battery replacement

Renault Clio - Video tutorial

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years 2012-2019
Part: Battery
Operation: Renault Clio 4 battery replacement

In this very simple video tutorial we will see how to replace the battery of a latest series Renault Clio. First we open the bonnet and with a socket wrench with extension we go to unscrew the support bolt of the bracket that we find at the bottom of the battery: we then remove the bracket and we go to detach the terminals from the poles with a wrench or better a socket wrench. At this point we can go to extract the battery and replace it with the new one by applying the reverse procedure and following the instructions in the video step by step!


Posted on 12 December 2023 by ScegliAuto



How to replace the key battery of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Let's start by removing the rear side of the electric key of our Renault Clio. Subsequently, using a flat screwdriver and levering, we will have to g
How to replace the key battery of a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Before we can start replacing the battery of the key of our Renault Clio, we will need to equip ourselves with a small slotted screwdriver. So let's
How to replace the key battery of a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Before starting, we will have to go to open the physical key of our Renault Clio, by pressing the relative release button. Using a thin but strong to

    Frequently Asked Questions

    • Clio 2019-2026 - What is the problem with the engine brake on the Renault Clio Hybrid? Read Answer
    • Clio 2005-2013 - What does the ignition of the anti-skid mean in the Renault Clio? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos