Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fan Resistor on a Renault Twingo

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

Is the fan on your Twingo not working properly? Let's look at how to remove the fan resistor. Use a lever to remove the plastic cover under the front windscreen (above the dashboard), and if there are securing screws, unscrew the cover.

Identify the part to remove: disconnect the large connector from the resistor, then take it out of the cabin. Insert a new fan resistor (connect the power connector).

After installing the replacement part, you can reattach the cover over the dashboard. Check that all parts are correctly mounted and test their functionality (start the vehicle and test the fan).


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Replacement of the cabin fan resistor of the Renault Twingo
Replacement of the cabin fan resistor of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this guide we will see the information related to disassembly and replacement of the cabin fan resistor of the Renault Twingo. First, we get on bo…
How to Remove the Cabin Fan Resistor of the Renault Twingo
How to Remove the Cabin Fan Resistor of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) The cabin fan resistor on a Renault Twingo is located inside the upper dashboard of the vehicle. To replace the resistor, remove the upper part of th…
How to Replace the Cabin Fan Resistor in the Renault Twingo
How to Replace the Cabin Fan Resistor in the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) You can replace the cabin fan resistor in the Renault Twingo by completely disconnecting the panel located at the top of the dashboard on the passeng…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos