Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan Resistor of the Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Checks and maintenance

The cabin fan resistor on a Renault Twingo is located inside the upper dashboard of the vehicle. To replace the resistor, remove the upper part of the dashboard using plastic trim tools to avoid scratching the bodywork. Disconnect the fan connector and using a star screwdriver, remove the fan from its position. Disconnect the resistor connector and extract it from its housing. Throughout the procedure, it is advisable to disconnect the battery to prevent internal short circuits in the vehicle.

Posted on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin fan resistor of the Renault Twingo
Replacement of the cabin fan resistor of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this guide we will see the information related to disassembly and replacement of the cabin fan resistor of the Renault Twingo. First, we get on bo…
How to Replace the Cabin Fan Resistor in the Renault Twingo
How to Replace the Cabin Fan Resistor in the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) You can replace the cabin fan resistor in the Renault Twingo by completely disconnecting the panel located at the top of the dashboard on the passeng…
How do you replace the cabin fan resistor of the Renault Twingo?
How do you replace the cabin fan resistor of the Renault Twingo?
Renault Twingo (1993-2007 / Twingo 1) To replace the cabin fan resistor of the Renault Twingo, you will need to completely remove the dashboard: start by removing the central control pane…

Other guides you may be interested in

    Frequently Asked Questions

    • Twingo 1993-2007 - Where is the OBD port on the Renault Twingo located? Read answer
    • Twingo 2014-2024 - What are the problems of the Renault Twingo? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos