Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the cabin fan of the Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Blower motor

Below we will see the instructions that will allow us to disassemble and replace the cabin fan of the Renault Twingo. First of all, we get on board the car and start by disassembling and removing the glove compartment; then we remove the upper plastic cover of the dashboard, on the passenger side, and then remove the air intake to access the cabin fan. At this point, we unscrew the fixing screws and disconnect the electrical connector of the fan, removing it and replacing it with the new original one; finally, we reassemble all the components of the dashboard.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Fan of the Renault Twingo
Removing the Cabin Fan of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Today, let’s discover the main steps to remove and replace the cabin fan of the Renault Twingo. First, get inside the vehicle and start removing the …
How to Replace the Cabin Fan on the Renault Twingo?
How to Replace the Cabin Fan on the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) To replace the cabin fan on the Renault Twingo, you need to remove the protective panel located at the top of the dashboard on the passenger side. On…
How to disassemble and replace the cabin fan of the Renault Twingo.
How to disassemble and replace the cabin fan of the Renault Twingo.
Renault Twingo (2007-2014 / Twingo 2) The instructions in this guide will show us how to disassemble and replace the cabin fan of the Renault Twingo. First, we get on board the car and st…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos