Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Removal of the Renault Clio module / internal control unit

Renault Clio - Video tutorial

Model: Renault Clio Clio 3, MK 3, Clio III - Years 2005-2013
Part: Control unit
Operation: Removal of the Renault Clio module / internal control unit

Today, in this video tutorial, we will see how to remove the internal control unit of the Renault Clio third series. We open the passenger side door and first of all remove the glove compartment side panel by unhooking it. Then we remove the screws with a screwdriver. Now we detach the upper frame of the glovebox and remove the torx screws that are present under it: we remove the entire compartment of the glovebox. We will therefore find all our cables to handle with care; we disconnect the three electrical connectors and go to remove our internal control unit.


Posted on 17 December 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Clio 2005-2013 - What problems has the ECU of the Renault Clio 1.5 dci shown? Read Answer
    • Clio 1998-2005 - What problems can the 2003 Renault Clio present? Read Answer
    • Clio 2005-2013 - What problems are common in the Renault Clio? Read Answer
    • Clio 2005-2013 - What problems are encountered on the Renault Clio dci? Read Answer
    • Clio 2012-2019 - Where is the Renault Clio ABS ECU located? Read Answer
    • Clio 1998-2005 - What problems are encountered on the Renault Clio 1 5 dci? Read Answer
    • Clio 2012-2019 - Where is the Renault Clio UCH ECU located? Read Answer
    • Clio 2005-2013 - What problems does the Renault Clio ECU have? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos