Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Laguna
  6. : Removal of key-remote control for repair

Renault Laguna - Video tutorial

Model: Renault Laguna X74, MK 2, Laguna 2 - Years 2001-2007
Part: Key
Operation: Removal of key-remote control for repair

When the remote control fails, it becomes impossible to open and close the doors remotely. Fortunately, the car can be accessed using the mechanical key. Daily use of the remote control can cause wear to the internal components, especially on the welds between the battery contacts and the printed circuit board. To remedy this problem, simply disassemble the remote control and extract the printed circuit. Using a small electronic soldering iron and a suitable tin wire, completely redo the soldering. If the plastic in the container is deteriorated, it can also be replaced.


Posted on 8 July 2023 by ScegliAuto



How do you replace the battery in the remote control of the Renault Laguna?
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) To replace the battery of the Renault Laguna remote control, you need to remove the key from the bottom of the device. Once this key has been removed
How to open the remote control key of the Renault Laguna.
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) Let's briefly see the instructions that will allow us to disassemble and open the electronic board of the Renault Laguna key, but also of the Espace.
How to replace the remote control battery in Renault Laguna 2
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) If the intelligent remote control of your Renault Laguna second series (year 2001-2007) suddenly stopped working, it means that the button battery in

Other guides that may interest you

    Frequently Asked Questions

    • Laguna 2001-2007 - What to do if the Renault Laguna II does not open or close with your card? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos