Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Joint on a Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Checks and maintenance

Replacing the damaged joint on a Renault Clio? Here’s how to disassemble it. Lift the car with a jack to a comfortable height for working, undo the wheel bolts (using a socket or air drill) and remove the wheel. Next, start unscrewing the brake disc bolts with a socket. Remove the bolts located under the disc and completely take off the wheel hub, then pull the arm with the joint using your hands. Fit the new CV joint, then begin reassembling all the parts in reverse order. Replace the boot around the joint. Apply grease to the new joint.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (1998-2005 / Clio 2, MK 2) Today, in this video tutorial, learn how to remove the driveshaft and CV joint from a Renault Clio Mk2. First, lift the vehicle and remove the front …
Renault Clio (1998-2005 / Clio 2, MK 2) In this video guide, learn how to remove and replace the wishbone of the suspension on the Renault Clio 2. First, lift the vehicle off the ground and…
Renault Clio (1990-1998 / Clio 1, MK 1) In this tutorial, learn how to replace the pollen filter on a first series Renault Clio. First, open the engine bonnet: then remove the upper seal of…

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos