Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Air Fan on Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

Removing the fan from the Kangoo? Disassemble all the dashboard plastics to access the air fan. Remove the covering plastics located under the front dashboard with a lever, and unscrew the securing screws of the dashboard with a screwdriver. Remove the glove compartment to take off the dashboard covering pieces.

Once at the fan, disconnect the electrical connector, then remove the fan. Insert a new fan unit (connect the power connector). Finally, reassemble the dashboard covering and tighten the screws.

Check the correct assembly of the previously installed parts and test the proper functioning of the air fan.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

Guide to disassembling the cabin fan of the Renault Kangoo
Guide to disassembling the cabin fan of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this guide we will see the main information that will allow us to disassemble and replace the cabin fan of the Renault Kangoo. First of all, we ge…
Replacement of the cabin fan of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today we will discover the instructions that will allow us to disassemble and replace the cabin fan of the Renault Kangoo. First of all, we get on bo…
How to replace the cabin fan of the Renault Kangoo?
How to replace the cabin fan of the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To replace the cabin fan of the Renault Kangoo, you need to dismantle all the components that make up the dashboard, particularly removing the glove …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos