Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Wheel Bearing Replacement

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Bearing

See other generations:
Video tutorial

Lift the vehicle on a hydraulic lift and remove the wheel; then remove the brake caliper, the tie rod end of the steering rack, and the fixing bolts of the front hub support to the suspension. To extract the bearing, it is recommended to use a hydraulic press: position the hub ensuring it is perfectly flat and aligned with the press piston; at this point, extract the old bearing from the hub (in some cases, it may be necessary to heat the hub with a torch to expand the bearing seat and facilitate extraction) and insert the new one. Then proceed with reassembly.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

How to replace the front wheel bearing on a Renault Clio
How to replace the front wheel bearing on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this tutorial, we will see how to replace the front wheel bearing on a Renault Clio, a simple operation but one that requires good manual skills. …
How to change the rear wheel bearing on a Renault Clio 3?
How to change the rear wheel bearing on a Renault Clio 3?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To carry out this operation, ensure the car is raised on a ramp. Start by removing the wheel by unscrewing the fixing bolts. Once this is done, you c…
How to Remove the Wheel Bearing on a Renault Clio
How to Remove the Wheel Bearing on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) How to remove a wheel bearing along with all associated parts on a Renault Clio. Position the car on a column lift, loosen the bolts with a telescopi…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos