Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wheel Bearing on a Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Bearing

How to remove a wheel bearing along with all associated parts on a Renault Clio. Position the car on a column lift, loosen the bolts with a telescopic spanner, and raise it to a comfortable height for work. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper, detaching it from the support, and using a socket wrench to loosen the caliper bolt. Now remove the caliper support and unscrew the bolts on the brake disc, pulling the disc towards you to detach it from the wheel hub. Completely remove the driveshaft from the car arm and extract the worn bearing. Install the new bearing using a pressing tool.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the rear wheel bearing on a Renault Clio 3?
How to change the rear wheel bearing on a Renault Clio 3?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To carry out this operation, ensure the car is raised on a ramp. Start by removing the wheel by unscrewing the fixing bolts. Once this is done, you c…
How to replace the front wheel bearing in a Renault Clio?
How to replace the front wheel bearing in a Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this tutorial we can see how to replace the front wheel bearing in the Renault Clio, a simple operation but one that requires good manual skills. …
How to Remove the Front Brake Disc Bearing on Renault Clio
How to Remove the Front Brake Disc Bearing on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) How do you remove the front brake disc bearing on a Renault Clio? First, position your car on a column lift (jack), loosen the bolts with a socket wr…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos