Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
This video is currently unavailable

Replacing the rear light on a Renault Kangoo is quite simple as it is secured to the car with two easily visible screws. By opening the rear hatch, you will notice the presence of two screws located on the inner side of the light that need to be unscrewed.

After removing the screws, the light will remain secured to the car by small snap clips that can be released by pulling the light outward. Once released, you will have access to the power connector which can be disconnected, or you can remove the entire lamp panel by pressing the plastic clips along its perimeter.

At this point, the light can be completely extracted from the car and replaced with a new one, ensuring to test the functionality of the bulbs before reassembling everything.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to replace the rear light on the Renault Kangoo
How to replace the rear light on the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this video tutorial, we will see how to remove and replace the rear light on the Renault Kangoo. First, open the tailgate and start unscrewing the…
Replacing the Rear Fog Light Bulb on the Renault Kangoo
Replacing the Rear Fog Light Bulb on the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Follow these steps to remove and replace the rear fog light bulb on the Renault Kangoo. First, move to the rear of the vehicle and start unscrewing t…
How do you replace the rear headlight bulb of the Renault Kangoo?
How do you replace the rear headlight bulb of the Renault Kangoo?
Renault Kangoo (1997-2008 / KC, MK 1, KW) In order to replace the rear headlight bulb of the Renault Kangoo, you will need to open the rear tailgate so that you can access the components loca…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos