Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear headlight bulb of the Renault Kangoo?

Model: Renault Kangoo KC, MK 1, KW - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Tail light bulb

See other generations:
Video tutorial

In order to replace the rear headlight bulb of the Renault Kangoo, you will need to open the rear tailgate so that you can access the components located inside the rear cargo compartment: here you will be able to locate the fixing screws located near the optical group.

These screws will need to be loosened and it will be possible to remove the headlight from its seat by disconnecting the connectors at the bottom: at this point, it will be possible to remove the bulb from its housing to replace it with a new one.


Posted on 23 March 2025 by ScegliAuto


Related tutorials

How to replace the rear light bulb of the Renault Kangoo
How to replace the rear light bulb of the Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Today we will explain how to replace the rear headlight bulb of a Renault Kangoo. First, open the rear doors and unscrew the two locking screws by ha…
How to replace the rear headlight bulb on a Renault Kangoo
How to replace the rear headlight bulb on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today, I will explain how to independently replace the rear headlight bulb on a Renault Kangoo. Open the boot and remove the side carpet cover where …
How to Replace the Rear Light Bulbs on a Renault Kangoo
How to Replace the Rear Light Bulbs on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Below are the instructions that will allow you to remove and replace the rear light bulbs on a Renault Kangoo. First, open the rear doors of the vehi…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos