Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Interior Light Ceiling Unit on Renault Trafic

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Interior dome light bulb

See other generations:
Video tutorial

Today, we will see how to remove the bulb from the ceiling light unit of a Renault Trafic, but also on other models like the Opel Vivaro. First, get inside the vehicle and use a plastic lever to detach the ceiling unit, as shown in the video.

At this point, disconnect the electrical connector to remove it completely. If you want to replace the bulb, simply detach the outer ceiling unit and replace the wedge bulb: then reassemble the ceiling unit by hooking it back in, and insert the whole piece into the designated space until it clicks into place.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to reset the AdBlue warning light on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) If the AdBlue warning light on the Renault Trafic remains on even after refilling with the additive, it is possible that a programming error has occu…
How to Replace the Side Indicator on the Renault Trafic 2016
How to Replace the Side Indicator on the Renault Trafic 2016
Renault Trafic (2014-2026 / MK 3) If one of the side indicators on your 2016 Renault Trafic has suddenly stopped working, don't worry because with the following guide you will be able…
Where is the interior light fuse located in the Renault Trafic van?
Where is the interior light fuse located in the Renault Trafic van?
Renault Trafic (2014-2026 / MK 3) If the interior light of your Renault Trafic van suddenly stops working, and the bulbs are in good condition, you can check the status of the respect…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos