Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wing Mirrors on a Renault Twingo

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

This short video shows you how to remove the wing mirrors on a Renault Twingo. First, using the appropriate removal tool, extract the plastic cover located inside the car corresponding to the wing mirror.

Next, disconnect the wiring that controls its positioning and unscrew the two screws that hold it in place. Once this is done, you can easily and quickly remove the wing mirror by applying a gentle outward push.

At this point, you can refit the old mirror or replace it with a new one by reversing the same procedure.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Adjust the Side Mirrors on a Renault Twingo
How to Adjust the Side Mirrors on a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) On the Renault Twingo, the adjustment of the side mirrors is done using the dedicated control in the driver's area (usually near the window controls …
How to replace the radio of the Renault Twingo
How to replace the radio of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Below we will see the steps that will allow us to disassemble and replace the standard radio of the Renault Twingo. First, we get into the car and st…
How to Open the Bonnet of the Third Generation Renault Twingo
How to Open the Bonnet of the Third Generation Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) In this short video, you will learn how to open the front bonnet of the third generation Renault Twingo. Unlike the classic lever under the driver's …

    Frequently Asked Questions

    • Twingo 2007-2014 - How many km does a Renault Twingo 1.2 petrol in reserve travel? Read answer
    • Twingo 1993-2007 - Where is the Renault Twingo horn located? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos