Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Third Brake Light from Renault Megane Grandtour

Model: Renault Megane Megane 2 - Years 2002-2010
Part:

Open the boot lid and remove the black internal plastics, the one closest to the boot and the small side pieces (see video). Use a plastic wedge (not metal!) to assist with this operation. Unscrew the six now-exposed Torx screws and then gently close the boot lid. The upper part of the boot lid will no longer be secured and will move, at this point, release the three clips using a flat screwdriver (or the wedge) and lift the movable "little lid". Once done, disconnect the light connector and extract the bulb.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the third brake light of a Renault Megane 2
How to disassemble the third brake light of a Renault Megane 2
Renault Megane (2002-2010 / Megane 2) Today we will see how to remove the third brake light on a Renault Megane, second generation model produced from 2002 to 2010. So let's start the ope…
How to Replace the Third Brake Light on a Renault Megane
How to Replace the Third Brake Light on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Here’s how to replace the bulbs of the third brake light on a Renault Megane: lift the tailgate and remove the cover of the third brake light from th…
How to Replace the Rear Light Bulbs in a Renault Megane Mk3 Grandtour
How to Replace the Rear Light Bulbs in a Renault Megane Mk3 Grandtour
Renault Megane (2008-2015 / Megane III, Megane 3) This guide shows how to remove the rear light of the Renault Megane 3 Grandtour. The first step is to go to the boot and, on the side you are working…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos