Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to replace the rear light bulbs on the Renault Megane Mk3 Grandtour

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Tail light
Operation: How to replace the rear light bulbs on the Renault Megane Mk3 Grandtour

The guide shows how to remove the rear light of the Renault Megan 3 Grandtour. The first step is to go to the luggage compartment and, from the side to be operated on, remove the glove compartment protective panel. At this point it is necessary to detach the two plastic bolts protecting the nacelle fixing clips. Pry these elements to unlock the light and remove it from the outside of the vehicle. Disconnect the power cord before replacing the bulbs. To replace the bulbs on the rear hatch it is necessary to remove the plastic cover and unscrew the Torx T20 screw.


Posted on 6 April 2024 by ScegliAuto



Replacing the rear light bulbs on Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Replacing the rear light bulbs of the Renault Megane, let's see how they change. Open the luggage compartment lid and remove with a lever the plastic
How to replace the rear light bulbs in Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial we can see how to replace the rear light bulbs in your Renault Megane, an extremely simple and fast operation. First of all make sur
How to change the rear light bulbs of a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to change the rear light bulbs of a Renault Megane? We open the bonnet of the luggage compartment, unscrew with a screwdriver (with a socket wren

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos