Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Front Windscreen Wiper Blade on a Renault Trafic

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Windshield wipers

See other generations:
Video tutorial

Before you can start, lift the front wiper arm on your Renault Trafic. First, open the clip located in the centre of the new wiper blade you need to fit. Once done, insert the blade into the designated holder at the end of the arm. After completing this step and ensuring it is correctly inserted, close the upper hook.

Once you have closed the upper hook of the new blade, lower the wiper arm, and you will have successfully completed the fitting.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Renault Trafic 3
How to Replace the Wiper Blades on a Renault Trafic 3
Renault Trafic (2014-2026 / MK 3) To replace the wiper blades on a Renault Trafic model 3, first park the vehicle on a flat surface and engage the handbrake for added safety. Then, li…
How to Reset the Service Light on a Renault Trafic Van?
How to Reset the Service Light on a Renault Trafic Van?
Renault Trafic (2014-2026 / MK 3) Resetting the service light on a Renault Trafic van, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure…
How to Replace the Front Headlight Bulb on a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Removing the front headlight bulb on a Renault Trafic is a straightforward task that can be done independently in just a few minutes. First, switch o…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos