Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting an Additional Chip Tuning Module

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Accessory kit

For this operation, you need to obtain the tuning module kit for your vehicle model. Locate and remove the connector of the installed ECU. After connecting the new additional accessory to the supplied cable, connect one end of this cable to the vehicle's ECU connector and the other end to the connector that went to the installed ECU. Essentially, the kit is inserted in series with the cable that powers the vehicle's ECU. Position the new ECU in a suitable location and secure it with plastic ties. The kit requires a power supply, so connect the negative wire with a terminal to a chassis screw and the positive wire to a switched fuse.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset and program the Renault Clio ECU
How to reset and program the Renault Clio ECU
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today's guide will show us the necessary instructions to restore and program the Renault Clio ECU. First of all, we get on board the car and start co…
How to replace the spark plugs and ignition module on your Clio 2
How to replace the spark plugs and ignition module on your Clio 2
Renault Clio (1998-2005 / Clio 2, MK 2) In this video we will show you how to replace the spark plugs and the Clio 2 ignition control unit. First, take a socket wrench and extract the four …
Guide to disassembling the ECU of the Renault Clio 1.2
Guide to disassembling the ECU of the Renault Clio 1.2
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, we will discover the steps that will show us how to disassemble and replace the ECU (Engine Control Unit) of the Renault Clio 1.2. Fir…

How to Replace the Front Headlamp Bulbs on a Mazda 3

Learn how to replace the front headlamp bulbs on a Mazda 3 with LED bulbs: open the bonnet (pull the lever located at the bottom right of the dashboard), and secure it with the prop rod. Locate the inspection cap of the headlamp (located at the rear of the headlamp) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the bulbs using a screwdriver. Install the new LED bulbs (ensuring the type and size are correct) and insert the bulb holder back into the headlamp housing. Refit all previously removed parts.

Watch the video!


by ScegliAuto

More videos