Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Talisman
  6. : Fuel filter replacement on Renault Talisman

Renault Talisman - Video tutorial

Model: Renault Talisman MK 1 - Years 2015-2023
Part: Petrol filter
Operation: Fuel filter replacement on Renault Talisman

To replace the fuel filter on Renault Talisman you will obviously have to work from under the vehicle: if you do not have the bridge, therefore, raise the car with one or two jacks (one on each side). Remove the three retaining clips holding the smaller lower cover (there are two) of the engine compartment. Disconnect the connector, drain the fuel filter compartment and unscrew it until it is removed. Insert and screw the new filter firmly, reconnect the connector and mount the lower protective cover that you initially removed. As you can see, the operation is simple, the only difficulty is in the working position if you do not have the lifting bridge.


Posted on 7 January 2024 by ScegliAuto



How to replace the diesel filter on Renault Talisman dCi - Samsung SM6
Renault Talisman (2015-2023 / MK 1) Let's see in this guide how to disassemble and replace the diesel filter of the Renault Talisman dCi, but also of the Samsung SM6. First of all we ra
How to replace the gear knob of the Renault Talisman
Renault Talisman (2015-2023 / MK 1) If you own a Renault Talisman and want to replace the gear knob yourself, all you have to do is follow these steps. First of all, you need to purchas
Where is the fuse box located in the Renault Talisman?
Renault Talisman (2015-2023 / MK 1) If you intend to intervene independently on one or more fuses of your Renault Talisman but do not know where they are located, then all you have to d

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos