Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the pollen filter on a Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

Remove the gear lever gaiter from its base by prying it up from underneath with a plastic wedge. Similarly, remove the plastic trim surrounding the gear lever and disconnect its connector.

Unscrew the two Torx T20 screws now exposed under the radio controls. Move to the lower area, near the pedals on the driver's side and in the same area on the passenger side, and remove the two clips (one on each side) securing the central lower plastic.

Open the glove compartment and remove the side plastic related to the airbag switch. Unscrew the 7 Torx T20 screws that allow you to detach the glove compartment.

Remove the plastic cross member and unscrew the single screw that secures the air filter cover, which you can now replace.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Renault Kangoo?
How to Replace the Cabin Filter on a Renault Kangoo?
Renault Kangoo (1997-2008 / KC, MK 1, KW) To replace the cabin filter on a Renault Kangoo, open the bonnet to access the panel at the base of the windscreen. Before removing this panel, disco…
How do you replace the cabin fan resistor of the Renault Kangoo?
How do you replace the cabin fan resistor of the Renault Kangoo?
Renault Kangoo (1997-2008 / KC, MK 1, KW) It will be possible to replace the cabin fan resistor of the Renault Kangoo by opening the hood, so that you can access the top of the engine compart…
Replacing the Air Filter on the Renault Kangoo
Replacing the Air Filter on the Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) One of the tasks to perform during the service on the Renault Kangoo is replacing the air filter. Open the engine compartment, remove the breather ho…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos