Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin fan resistor of the Renault Kangoo?

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Blower motor

It will be possible to replace the cabin fan resistor of the Renault Kangoo by opening the hood, so that you can access the top of the engine compartment immediately below the windshield: here you will need to remove the lining at the base of the windshield so that you can access the cabin fan from the passenger side. Next to it, there will be the resistor that can be removed from its seat by disconnecting the connector and inserting the new replacement part: once everything is connected, you can verify that everything is working.

Posted on 23 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the Renault Kangoo's cabin fan.
Disassembly of the Renault Kangoo's cabin fan.
Renault Kangoo (2007-2021 / MK 2, FC, FW) Below we will discover the main instructions on how to disassemble and replace the cabin fan of the Renault Kangoo. The cabin fan is located on the t…
How to Change the Fan Resistor on a Renault Kangoo II (Without Removing the Dashboard)
How to Change the Fan Resistor on a Renault Kangoo II (Without Removing the Dashboard)
Renault Kangoo (2007-2021 / MK 2, FC, FW) The video shows an alternative solution for replacing the fan resistor on a Renault Kangoo II, which allows you to avoid completely removing the dash…
How to Replace the Heating Resistor in a Renault Kangoo
How to Replace the Heating Resistor in a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Today, you will learn how to replace the heating resistor in a Renault Kangoo. To replace the resistor, open the front bonnet and remove the wipers. …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos