|
Do it yourself
| |||
| ||||
How to Change the Fan Resistor on a Renault Kangoo II (Without Removing the Dashboard)
Model: Renault Kangoo
MK 2, FC, FW
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
The video shows an alternative solution for replacing the fan resistor on a Renault Kangoo II, which allows you to avoid completely removing the dashboard, a lengthy and complex job. First, the YouTuber removed the lower panels under the steering wheel (both the upper and lower ones) and also the central side panels. This allowed access to the area where the fan resistor is located, mounted on a plastic base with two bolts (visible from the side). The problem was that the connector going to the fan motor is located above the dashboard and is not reachable from below. The adopted solution was to modify the new resistor (in the case of the video, it came from a Renault Mégane, with a different shape but the same wiring scheme). The casing of the old resistor was cut, and the new one was inserted inside it, keeping the original base. This way, the connectors aligned perfectly. Then, the wires were connected to the fan motor. Finally, the fan was tested: the air conditioning was turned on, and all speeds were tried. The fan worked perfectly.
Posted on 11 June 2026 by ScegliAuto
Related tutorials
Renault Kangoo
(1997-2008 /
KC, MK 1, KW)
It will be possible to replace the cabin fan resistor of the Renault Kangoo by opening the hood, so that you can access the top of the engine compart…
Renault Kangoo
(2007-2021 /
MK 2, FC, FW)
Removing the fan from the Kangoo? Disassemble all the dashboard plastics to access the air fan. Remove the covering plastics located under the front …
Renault Kangoo
(2007-2021 /
MK 2, FC, FW)
In this video, we see how the YouTuber solved the problem of the fan on the Renault Kangoo that only worked at maximum speed. He had asked around and…
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?
To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
