Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Solution to the Renault Kangoo heating controls.

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Air conditioner

In this video we see how the youtuber solved the problem of the Renault Kangoo fan that only worked at maximum speed. He had asked around and checked on forums, and the most common answer was to change the fuse related to the fan, or that it was directly the resistor, which is quite common when the fan only works at maximum speed, without working at intermediate speeds. But he wanted to dismantle the front control panel and noticed that with the panel open, all speeds worked. It was therefore just a problem of dirt, an excessive deposit of dust deposited on the wiring, which he solved by cleaning the wires with WD-40 and then reassembling the panel.

Posted on 12 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the heating control of the Renault Kangoo 2?
Renault Kangoo (2007-2021 / MK 2, FC, FW) The car mentioned is the Renault Kangoo 2, for which we have a video presentation attached here. In this article, we will delve into how to disassemb…
Guide to disassembling the dashboard and cabin heater radiator of the Renault Kangoo.
Guide to disassembling the dashboard and cabin heater radiator of the Renault Kangoo.
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today's guide will show us the steps to disassemble and replace the dashboard and the cabin heating radiator of the Renault Kangoo. First of all, we …
How do you replace the heating radiator of the Renault Kangoo?
How do you replace the heating radiator of the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In order to replace the heating radiator of the Renault Kangoo, you need to completely dismantle the dashboard of the vehicle, first removing the glo…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos