Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the heating fan in the Renault Kangoo 2?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Blower motor

Get ready, if you want to dismantle the heating fan of your Renault Kangoo 2, to face a rather complex job, but still feasible. This fan is housed behind the dashboard, which will have to be completely disassembled, but before that, of course, you will have to remove the instrument panel, all the control part on the dashboard, the radio, the glove compartment and finally the dashboard itself. Once you reach the aforementioned fan, there won't be much to do, just disconnect the connector that powers it electrically and the fixing pins.

Posted on 9 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the heating control of the Renault Kangoo 2?
Renault Kangoo (2007-2021 / MK 2, FC, FW) The car mentioned is the Renault Kangoo 2, for which we have a video presentation attached here. In this article, we will delve into how to disassemb…
Replacement of the cabin fan of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today we will discover the instructions that will allow us to disassemble and replace the cabin fan of the Renault Kangoo. First of all, we get on bo…
Removing the Air Fan on Renault Kangoo
Removing the Air Fan on Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Removing the fan from the Kangoo? Disassemble all the dashboard plastics to access the air fan. Remove the covering plastics located under the front …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos