Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Tailgate Panel on Renault Laguna 3

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Door trim panel

In this video tutorial, you will see how to remove the tailgate panel on a Renault Laguna MK3. This operation may be necessary, for example, when replacing the tailgate lock; so first, open the tailgate and unscrew the screw found inside the handle using a Torx T20 screwdriver. At this point, pry on the sides to remove the tailgate panel, as illustrated in the video; now you will be able to access the tailgate lock to remove and replace it!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Rear Light on a Renault Laguna
Removing and Replacing the Rear Light on a Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Here are the instructions to remove and replace the rear light and its bulbs on a Renault Laguna. First, open the boot lid and start removing the sid…
How to replace the rear headlight bulb on the Renault Laguna
How to replace the rear headlight bulb on the Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Today we will explain how to replace the rear headlight bulb of the Renault Laguna. The steps to follow are: - open the trunk; - unscrew the nut loca…
Removing Door Panel on Renault Laguna
Removing Door Panel on Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) How to remove the door trim panel for maintenance inside. Unscrew the screws located in the space of the upper door opening lever and remove the wind…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos