Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Indicator Stalk on a Renault Master Van

Model: Renault Master MK 2 - Years 1997-2010

In this video, follow the steps to replace the indicator stalk on a Renault Master van. First, using a Torx screwdriver, remove the lower trim plastic from the steering column; next, remove the upper trim plastic. At this point, you can disconnect the indicator stalk using a flathead screwdriver, pull it from its housing, and detach the connector by pressing on the two side tabs. Connect the new indicator stalk to the connector and secure it in its housing. Finally, before refitting the trim plastics, check that it functions correctly.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cigarette Lighter Socket in a Renault Master Van
How to Replace the Cigarette Lighter Socket in a Renault Master Van
Renault Master (1997-2010 / MK 2) In this tutorial, you will see how to replace the cigarette lighter socket in a Renault Master van, a very simple operation useful if you want to ins…
How to replace the handles of the Renault Master 2
How to replace the handles of the Renault Master 2
Renault Master (1997-2010 / MK 2) Today we will explain how to replace the handles of the Renault Master model mk2 independently with simple and quick steps. To perform the handle rep…
How to replace the rear lights on the Renault Master van?
Renault Master (2010-2023 / MK 3) In this tutorial we can see how to replace the rear lights in the Renault Master van, an extremely simple and quick operation. First of all, make sur…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos