Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Climate Control Lights on Renault Scenic

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Instrument panel light

See other generations:
Video tutorial

Start by unscrewing the two Torx T20 screws underneath the central dashboard. Manually detach the radio frame and the surface part of it (the one with the buttons).

Pull out, also by hand, the drawer beneath the radio, so you can push the radio from behind (you can also use a small flat screwdriver to lever it sideways). While pulling out the radio, of course, disconnect its rear connectors.

Remove the internal support of the radio and unscrew the now-exposed screws. Remove the frame of the gear lever and that of the climate controls, then pull them out and replace the bulbs.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Replacing the Mirror on a Renault Scenic
Renault Megane (2002-2010 / Megane 2) Replacing the mirror mounted in the housing of the external mirror on a Renault Scenic. Use a plastic lever to pry between the edge of the mirror fra…
How do you turn the air conditioning on and off in the Renault Megane?
How do you turn the air conditioning on and off in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To turn the air conditioning on and off in the Renault Megane, you must first turn on the instrument panel by inserting the ignition key into the cor…
How to Replace the Oil and Engine Filter on a Renault Megane Scenic
How to Replace the Oil and Engine Filter on a Renault Megane Scenic
Renault Megane (2002-2010 / Megane 2) I will show you how to change the oil and the engine filter on our Renault Megane Scenic. It's not a very complex operation; just be careful, and you…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos