Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil and Engine Filter on a Renault Megane Scenic

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

See other generations:
Video tutorial

I will show you how to change the oil and the engine filter on our Renault Megane Scenic. It's not a very complex operation; just be careful, and you can do it without needing a specialist.

First, remove the oil filler cap (to avoid creating a vacuum when removing the oil drain plug). Now, move on to removing the oil drain plug (place a container under the Renault Megane Scenic to collect the oil). Meanwhile, remove the oil filter using a ratchet wrench and replace it with a new one. After ensuring all the old oil has drained, you can install the drain plug and proceed to refill with new oil.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to Perform Basic Service on a Renault Megane 4?
How to Perform Basic Service on a Renault Megane 4?
Renault Megane (2015-2023 / Megane IV, Megane 4) Basic service consists of simply changing the engine oil and oil filter, without any other interventions. Here’s how to do it on a Renault Megane 4. …
Engine Oil Change on Renault Megane
Engine Oil Change on Renault Megane
Renault Megane (1995-2003 / Megane 1) Changing the engine oil on a Renault Megane? Here’s how to change the oil. Lift the car on a column lift or jack, unscrew the plug of the oil sump wi…
How to Change the Engine Oil and Filter in a Renault Megane
How to Change the Engine Oil and Filter in a Renault Megane
Renault Megane (2002-2010 / Megane 2) To change the engine oil and filter in a Renault Megane 2, safely lift the vehicle and position a container under the oil sump. Unscrew the filler ca…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos