Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing External Wing Mirror from Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Side mirror

In this video, you will see how to remove and replace the external wing mirror of a first generation Renault Kangoo. First, open the front door and remove the triangular plastic panel located behind it using a plastic lever; then disconnect the electrical connector for the mirror glass adjustment and unscrew the fixing bolt with a socket wrench with an extension, as shown in the video. At this point, remove the external wing mirror and replace it with the new one!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Rear-View Mirror on a Renault Kangoo
How to Replace the External Rear-View Mirror on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) This guide shows how to remove and replace the external rear-view mirror on a Renault Kangoo. First, open the front door of the vehicle and start by …
Replacing the External Mirror on a Renault Kangoo
Replacing the External Mirror on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Is the external mirror on your Renault Kangoo broken? Start by removing the mirror from above the door. Open the car door, remove the internal trim p…
How to Install the Right External Wing Mirror on a Renault Kangoo
How to Install the Right External Wing Mirror on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today's guide will show you the necessary steps to install the right external wing mirror on a Renault Kangoo. First, open the front door and start b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos