Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2006 Renault Modus

Model: Renault Modus MK 1 - Years 2004-2013
Part: Service warning light

This guide shows how to reset the maintenance interval light on the 2006 Renault Modus. The first step is to turn on the instrument panel and press the end button on the right stalk until the maintenance interval is displayed on the instrument panel. While holding the button for ten seconds, the selected interval can be reset. Wait for the message on the display to flash and the new mileage interval for the next service to be shown. At this point, you can turn off the instrument panel and turn it back on to check the success of the operation.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2008 Renault Modus
How to Reset the Service Light on a 2008 Renault Modus
Renault Modus (2004-2013 / MK 1) If you own a 2008 Renault Modus and want to manually reset the service light on the instrument panel, follow the steps outlined in this guide. First,…
How to Reset the Service Light in the Renault Modus?
How to Reset the Service Light in the Renault Modus?
Renault Modus (2004-2013 / MK 1) As we can see in this tutorial, resetting the service light in the Renault Modus is an extremely simple and quick operation. Before doing this, ensur…
How to Reset the Oil Service on the Renault Modus?
How to Reset the Oil Service on the Renault Modus?
Renault Modus (2004-2013 / MK 1) As we can see in this tutorial, resetting the oil service on the Renault Modus is a very simple and quick operation. Before doing this, ensure you ha…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos