Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight Bulb of a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Before starting, open the front bonnet to allow free access. Remove the protective cap located behind the bulb by simply unhooking it from its position.

Next, disconnect the connector attached to the bulb. Once done, to free the bulb, you will need to remove the clip that holds it in place by hand.

After removing the clip, you can take out the bulb. At this point, you have successfully removed the bulb from its housing, and you can proceed to install the new bulb.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the 2011 Renault Clio
How to replace the headlight bulb of the 2011 Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today we will explain how to replace the front headlight bulb of a 2011 Renault Clio on your own. It is important during the replacement operation to…
How to Replace the Front Headlight Bulb on a Renault Clio
How to Replace the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The following instructions will allow you to remove and replace the front headlight bulb on a Renault Clio. First, open the engine bonnet of the vehi…
How to Replace the Front Headlamp Bulb on the Renault Clio
How to Replace the Front Headlamp Bulb on the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide will show you how to remove and replace the front headlamp bulb on the Renault Clio, following these simple instructions. First, open the …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos