Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Bulb on a Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

Do you want to change the headlamp bulb on a Megane? Here’s how to replace it from inside the front lamp. Lift the bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop.

Locate the inspection cap of the lamp (located at the rear of the lamp) and remove it. If it is the left lamp, you will need to remove the air duct behind it. You will find the bulbs with metal holders; pull the holders out of the lamp and extract the damaged bulbs with the help of a screwdriver.

Install the new bulbs inside the lamp and finally close it with the cap.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Replacing the Bulb on a Renault Megane
Replacing the Bulb on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Today, you will learn how to change the dipped beam bulb on a Renault Megane 2. Open the bonnet and prop it up. For added safety, remove the ignition…
How to Change the Front Headlight Bulb on the Renault Megane
How to Change the Front Headlight Bulb on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Here are the instructions for removing and replacing the front headlight bulb on the Renault Megane in simple and quick steps. Access the front headl…
How to Change the Front Headlamp Bulb on a Renault Megane
How to Change the Front Headlamp Bulb on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Discover in this guide how to remove and replace the front headlamp bulb on a Renault Megane by following these simple and quick steps. First, open t…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos