Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Reverse Light Bulb Located on the Renault Scénic 2 and How to Remove It?

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Light bulb

The reverse light bulb on the Renault Scénic 2 is located within the rear light unit. As shown in the attached video, to access the bulb, you need to remove the entire rear light, which is a very simple operation and within everyone's reach. First, with the boot open, remove the two screws with a star screwdriver, extract the light and disconnect the connector with the help of a flat screwdriver. Finally, extract the base where the bulbs are located by loosening the plastic clip at the bottom. The reverse light is the second one from the top.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the reverse light bulb of the Renault Scenic
How to replace the reverse light bulb of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Below we will see the instructions that will allow us to disassemble and replace the reverse lights of the Renault Scenic. First of all, let's move t…
How to change the reverse light bulb and the rear fog light bulb on the Renault Grand Scenic
How to change the reverse light bulb and the rear fog light bulb on the Renault Grand Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this video, we will see how to change the reverse light bulb and the rear fog light on a Renault Grand Scenic, which is similar to the Scenic III:…
How to Replace the Headlight Bulb on a Renault Scenic
How to Replace the Headlight Bulb on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) This video tutorial shows the procedure to replace the front headlight bulb on a Renault Scenic 2. The procedure is very simple; just open the bonnet…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos