Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Dipped Beam on Renault Scenic

Model: Renault Scenic Scenic IV, Scenic 4, MK IV, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight

See other generations:
Video tutorial

With the engine off and the handbrake engaged, lift the front bonnet. Remove the round rubber cover located behind the dipped beam bulb.

You will notice two Torx screws next to the connector: there is no need to unscrew them. Now unscrew the connector and extract it along with the bulb.

Remove the bulb from the connector, and you're done. Reassemble everything in the headlamp and replace the rubber cover.

In the video, if needed, the same maintenance is shown for the fog light bulbs and indicator bulbs. Goodbye and see you in the next tutorial!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Renault Scenic (2003-2009 / Scenic 2, MK 2) Below we will see the instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Renault Scenic. Firs…
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The instructions in this guide will illustrate how to replace the front headlight bulb on a Renault Scenic. First, open the vehicle's bonnet and star…
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) These short and simple instructions will show us how to disassemble and replace the dipped beam and main beam bulb of the headlight unit of the Renau…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos