Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in Renault Kadjar?

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Cabin air filter

Replacing the cabin filter in the Renault Kadjar is a relatively simple operation, but complicated by the cramped space in which you have to go to work. Let's see how to do it in the attached video guide valid for various Renault models. First, we remove the right side panel of the center console and the glove box drawer. As shown in the video, we can also loosen the glove box frame to create more space and make work easier. The door of the internal filter is held by a single screw, once removed, we can proceed to extract the old filter and install the new one. The assembly of all the disassembled parts will then follow, following the reverse procedure.

Posted on 2 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to change the cabin filter of the Kadjar
How to change the cabin filter of the Kadjar
Renault Kadjar (2015-2022 / MK 1) How to change the pollen filter on the Renault Kadjar? We remove the cover placed in the lower part of the dashboard (right side under the glove box)…
How do you replace the cabin filter of the Renault Kadjar?
How do you replace the cabin filter of the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) The cabin filter on the Renault Kadjar can be replaced by finding the corresponding housing, which will be located immediately below the glove compar…
How to replace the air filter of the Renault Kadjar
How to replace the air filter of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The cabin air filter of the Renault Kadjar is located inside the cabin, specifically under the passenger side glove compartment. To replace the cabin…

How to Remove the Brake Disc on Mitsubishi Pajero

How to remove the brake disc along with the brake pads on a Mitsubishi Pajero? First, lift the vehicle on a column lift to a suitable height for working. Next, remove the wheel (using a telescopic spanner or air drill) with the respective bolts. Undo the locking bolt of the brake caliper, and remove it from the caliper support. Remove the caliper support from the wheel hub using a socket spanner. Once the brake disc is free, undo the screws with a fixed spanner and detach the disc from the wheel hub. Disconnect the various wiring and brake fluid pipes from the wheel assembly. Replace them with new parts (always use original and compliant parts). Prepare to install the new disc along with the respective pads, brake caliper, caliper support, etc.

Watch the video!


by ScegliAuto

More videos