Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the mirror arrow lens Renault Megane

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Side mirror

How to change the mirror arrow of a Renault Megane? We disassemble the external rear-view mirror if damaged or the cover to remove the indicator light. We pry between the perimeter of the frame of the cap and the mirror. We pry until the plastic of the shell does not detach from the mirror. We remove the arrow spotlight: we replace the damaged bulb inside it. We are careful to hook the plastic snap clips of the cap inside the mirror. Let's test the functioning of the side arrow inside the mirror.

Posted on 15 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to change the mirror of a Renault Megane
Renault Megane (2002-2010 / Megane 2) With a lever we go to pry between the perimeter of the mirror frame and the mirror glass of the same. We pry until the mirror comes off the mirror (w…
How to remove the mirror from the mirror of a Renault Megane
Renault Megane (1995-2003 / Megane 1) Let's see how to remove the mirror mounted above the exterior mirror of a Renault Megane. With a plastic lever, we go to pry between the perimeter of…
Replacement of the Renault Megane III side mirror cover.
Replacement of the Renault Megane III side mirror cover.
Renault Megane (2008-2015 / Megane 3, Megane III) In this video we can see how to change the outer cover of the rearview mirror of a Renault Megane III: the operation is done on a mirror that has bee…

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos