Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Mirror Cover on the Renault Megane III

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Side mirror

See other generations:
Video tutorial

In this video, we can see how to change the outer cover of the wing mirror on a Renault Megane III: the operation is done on a mirror that has been removed from its housing, but with a bit more care, it can also be done without removing it from the vehicle.

Remove the glass/mirror by moving it to one side and then disconnecting the electrical connectors; lever off the outer cover with a plastic spatula to avoid damaging anything, then gently clip the new cover onto the mirror's skeleton.

Now reconnect the electrical plugs and clip the mirror glass back into place.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to Remove the External Rear-View Mirror of the Renault Megane
How to Remove the External Rear-View Mirror of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today, follow these step-by-step instructions to remove and replace the external rear-view mirror of the Renault Megane. First, open the front door o…
Replacing the External Rear-View Mirror of a Renault Megane
Replacing the External Rear-View Mirror of a Renault Megane
Renault Megane (2002-2010 / Megane 2) The steps in this guide will allow you to remove and replace the external rear-view mirror of a Renault Megane. First, get inside the vehicle and sta…
How to Dismantle and Install the External Wing Mirror of the Renault Megane
How to Dismantle and Install the External Wing Mirror of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today's steps will illustrate how to dismantle and replace the external wing mirror of the Renault Megane. First, open the front door and start remov…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos