Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Rear-View Mirror of a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Side mirror

The steps in this guide will allow you to remove and replace the external rear-view mirror of a Renault Megane. First, get inside the vehicle and start removing the plastic cover found behind the rear-view mirror; then unscrew the screws located inside the holes, disconnecting the electrical connector for the glass adjustment to slide the mirror out from the outside, as shown in the video. At this point, install the new rear-view mirror, securing it properly and finally adjusting the angle of the glass!

Posted on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Rear-View Mirror of the Renault Megane
How to Remove the External Rear-View Mirror of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today, follow these step-by-step instructions to remove and replace the external rear-view mirror of the Renault Megane. First, open the front door o…
How to Remove the External Wing Mirror from a Renault Megane
How to Remove the External Wing Mirror from a Renault Megane
Renault Megane (2002-2010 / Megane 2) In this brief guide, we will discover the necessary instructions to remove and replace the external wing mirror of the Renault Megane. First, open th…
How to Replace the External Wing Mirror on the Renault Megane
How to Replace the External Wing Mirror on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow the necessary steps to remove and replace the external wing mirror on the Renault Megane. First, open the front door and start by removing the…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos