Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on the Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Side mirror

Follow the necessary steps to remove and replace the external wing mirror on the Renault Megane. First, open the front door and start by removing the triangular plastic cover located behind the mirror; then use a ratchet spanner to undo the three fixing screws, disconnecting the adjustment electrical connector to remove the wing mirror from the outside, as shown in the video. At this point, install the new wing mirror, securing it properly and adjusting the glass!

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Rear-View Mirror of the Renault Megane
How to Remove the External Rear-View Mirror of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today, follow these step-by-step instructions to remove and replace the external rear-view mirror of the Renault Megane. First, open the front door o…
How to remove the exterior rearview mirror of the Renault Megane Cabrio.
How to remove the exterior rearview mirror of the Renault Megane Cabrio.
Renault Megane (2008-2015 / Megane III, Megane 3) If you have a Renault Megane Coupé and want to find out how to safely remove the external rearview mirror, all you need to do is read the following g…
How to replace the external rearview mirror of the Renault Megane
Renault Megane (1995-2003 / Megane 1) If you want to replace the external rearview mirror of your first edition Renault Megane by yourself, all you have to do is follow the steps describe…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos