Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Wing Mirror from a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Side mirror

In this brief guide, we will discover the necessary instructions to remove and replace the external wing mirror of the Renault Megane. First, open the front door of the vehicle and start by removing the triangular plastic cover inside; then unscrew the securing screws and disconnect the electrical connector for the adjustment, pulling the mirror out from the outside, as shown in the video. At this point, carry out the repair or replacement of the external wing mirror, securing it properly and adjusting the angle of the glass!

Posted on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Rear-View Mirror of the Renault Megane
How to Remove the External Rear-View Mirror of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today, follow these step-by-step instructions to remove and replace the external rear-view mirror of the Renault Megane. First, open the front door o…
How to disassemble and install the external rearview mirror of the Renault Megane
How to disassemble and install the external rearview mirror of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today's steps will show us how to disassemble and replace the external rearview mirror of the Renault Megane. First, we open the front door and start…
How to remove the exterior rearview mirror of the Renault Megane Cabrio.
How to remove the exterior rearview mirror of the Renault Megane Cabrio.
Renault Megane (2008-2015 / Megane III, Megane 3) If you have a Renault Megane Coupé and want to find out how to safely remove the external rearview mirror, all you need to do is read the following g…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos